โ˜ฐ
๐Ÿšช Electric Gate Specialists ยท Singapore

Electric Gate & Auto Gate
Electrical Services Singapore

Professional electric gate and auto gate electrical services across Singapore. Our EMA-licensed electricians install dedicated power circuits, gate motor connections, access control wiring and safety sensor circuits for sliding gates, swing gates and commercial barrier systems at landed homes and commercial properties.

๐Ÿ”‘ Why Choose Us?

๐Ÿ…
EMA-Licensed Electricians
Safe, code-compliant gate wiring
๐Ÿšช
All Gate Types
Sliding, swing, barrier & bollard
โšก
Dedicated Circuits
Correct cable sizing & protection
๐Ÿ“ก
Access Control
Intercom, keypad & remote wiring
๐Ÿ’ธ
Upfront Pricing
Quote before work starts
๐ŸšชSliding Gate Wiring
๐Ÿ”„Swing Gate
โšกMotor Power Circuit
๐Ÿ“กAccess Control
๐Ÿ”’Safety Sensors
๐ŸขCommercial
Our Services

Electric Gate Electrical Services We Provide

Complete electrical services for electric gates โ€” from new dedicated circuit installation to access control wiring and fault repair.

โšก

Gate Motor Power Circuit Installation

Install a dedicated 230V power circuit from the DB box to the gate motor control panel โ€” correctly sized cable, weatherproof conduit or underground ducting, correct MCB and RCCB protection, and a weatherproof socket or terminal connection at the motor location.

Power Circuit
๐Ÿ”„

Gate Motor Replacement

Replace a failed or outdated auto gate motor with a new equivalent โ€” connecting the new motor control panel to the existing power circuit where correctly rated, or upgrading the circuit if needed. Compatible with all major gate motor brands in Singapore.

Motor Replacement
๐Ÿ“ก

Access Control Wiring

Install wiring for gate access control systems โ€” keypads, card readers, intercoms, video doorbell connections, fingerprint readers and remote control receivers. Includes power supply circuits for access control panels and data cable runs from access devices to gate motor controller.

Access Control
๐Ÿ”’

Safety Sensor Wiring

Install and connect safety photoelectric beam sensors, vehicle detection loops and safety edges for electric gates โ€” correctly wired to the motor controller to prevent the gate from closing on obstacles. Essential for safety compliance and insurance requirements.

Safety Sensors
๐Ÿข

Commercial Gate & Barrier Systems

Electrical installation for commercial gate barriers, rising bollards and heavy-duty industrial sliding gate systems โ€” including 3-phase motor connections for heavy gates, dedicated power panels, traffic loop detector installation and access control integration.

Commercial
๐Ÿ”ง

Electric Gate Fault Finding & Repair

Diagnose and repair electrical faults in electric gate systems โ€” tripping circuit breakers, power supply faults, motor controller PCB power issues, access control wiring faults and intermittent operation caused by loose or corroded connections in outdoor gate wiring.

Fault Finding
Why Professional Electrical Work Matters

Electric Gate Wiring โ€” Why It Must Be Done Right

Electric gate motors draw significant current โ€” particularly on startup โ€” and operate outdoors in Singapore's humid, tropical climate. Undersized cables, incorrect protection devices and poor weatherproofing are common causes of recurring gate faults, nuisance tripping, motor damage and electrical safety hazards.

A dedicated, correctly sized circuit with proper RCCB protection and outdoor-rated weatherproof wiring ensures your gate operates reliably and safely for years. Incorrect wiring from unlicensed workers is a common source of repeated gate problems โ€” and creates real safety risks from exposed or inadequately protected outdoor electrical connections.

  • โšก
    Correct Cable Sizing
    Gate motors draw high startup current. Undersized cables cause voltage drop, motor overheating and premature motor failure over time.
  • ๐ŸŒง๏ธ
    Outdoor Weatherproofing
    Gate wiring is exposed to Singapore's rain and humidity. Correctly weatherproofed conduit, outdoor-rated cables and waterproof junction boxes are essential.
  • ๐Ÿ”’
    RCCB Protection
    Outdoor electrical equipment must have RCCB protection โ€” protecting occupants from electric shock if the motor or wiring becomes earth-faulted.
EMA
Licensed electricians for all gate power circuit installation
All
Gate types โ€” sliding, swing, barrier, bollard
IP65+
Outdoor-rated weatherproof wiring and enclosures
RCCB
Correct earth fault protection on all gate circuits
Process

Our Installation Process

From site survey to fully operational auto gate electrical system.

01

Site Survey

Assess gate motor location, cable route from DB box, motor power requirements, access control requirements and any existing wiring before providing recommendations and pricing.

02

Quote

Provide a written quote covering the power circuit, conduit, weatherproofing, RCCB protection and any access control cabling โ€” clearly itemised so you understand exactly what is included.

03

Installation

Install the dedicated power circuit, outdoor conduit or underground duct, motor power connection, RCCB protection and all access control wiring โ€” neatly and fully weatherproofed.

04

Test & Commission

Test the complete installation โ€” verify motor operation, RCCB function, access control operation and safety sensor operation. Confirm reliable gate function and hand over.

Pricing

Estimated Pricing

Exact pricing after site survey and assessment.

Gate Motor Replacement
From $800
Labour + motor unit
  • Motor unit removal & disposal
  • New motor installation
  • Electrical connection
  • Remote programming
  • Safety sensor check
โญ Most Popular
New Auto Gate + Wiring
From $1,200
New gate + full electrical
  • Dedicated circuit from DB
  • Outdoor conduit & weatherproofing
  • Gate motor installation
  • RCCB protection
  • Access control wiring
Commercial Gate System
By Quotation
After site survey
  • Site survey & design
  • Heavy-duty power circuit
  • Barrier / bollard installation
  • Traffic loop detection
  • Access control integration

* Prices are estimates covering labour and basic materials. Gate motor units, access control hardware and special materials are additional. Final quote after site survey. GST may apply.

Why Us

Why Choose Us

Singapore's trusted electric gate electrical installation specialists.

๐Ÿ…

EMA-Licensed

All gate power circuit installation and electrical work must be done by EMA-licensed electricians. We are fully licensed โ€” your installation is safe, compliant and insurable.

๐ŸŒง๏ธ

Weatherproof Workmanship

All outdoor gate wiring installed with correct weatherproof conduit, outdoor-rated cable and waterproof junction boxes โ€” built to last in Singapore's tropical climate.

โšก

Correctly Sized Circuits

We correctly size cables and protection devices for gate motor load โ€” not undersized to save on cable cost. Correct sizing ensures reliable operation and long motor life.

๐Ÿ“ก

Access Control Integration

Experience wiring intercoms, keypads, card readers, video doorbells and remote receivers into auto gate systems โ€” providing complete, integrated gate access control.

๐Ÿ’ธ

Transparent Pricing

Written quote covering all electrical works before any work starts. No surprises โ€” you know what the circuit, conduit, protection and access control wiring will cost upfront.

๐Ÿ”ง

Fault Finding Expertise

We diagnose and fix the electrical root cause of recurring gate problems โ€” not just reset trip switches. Proper repair eliminates recurring faults rather than masking them.

FAQ

Frequently Asked Questions

Yes โ€” installing a new power circuit from the DB box to the gate motor location constitutes electrical wiring work that must be carried out by an EMA-licensed electrician in Singapore. This includes the circuit cable, conduit, MCB and RCCB installation at the DB box and the terminal connection or socket at the gate motor.
It depends on whether the existing socket is a dedicated circuit correctly rated for the gate motor load, and whether it has RCCB protection. Using a shared or underrated circuit can cause nuisance tripping and is a safety risk. A dedicated circuit sized specifically for the gate motor is the correct and recommended solution.
Underground cables should be laid in conduit at a depth that provides mechanical protection โ€” typically at least 600mm in trafficked areas and 300mm in non-trafficked areas, in conduit. The cable should be correctly rated for underground use, or a conduit appropriate for underground installation should be used to protect standard cable.
Common access control options include remote controls, keypads (PIN code entry), card readers (RFID), fingerprint readers, video intercoms with door release, and smartphone app control. We install the electrical wiring and power supplies required for all these systems โ€” the access control unit itself is supplied by the gate specialist or we can procure based on your requirements.
Common causes include an undersized circuit breaker or cable, a failing motor drawing excessive current, earth fault in the outdoor wiring (often from weathering and water ingress), a short circuit in the motor controller PCB, or a faulty limit switch. We diagnose the specific electrical cause and repair correctly rather than just resetting or replacing the breaker.
Coverage

Serving All Areas in Singapore

Ang Mo KioBedokBishanBoon LayBukit BatokBukit MerahBukit PanjangBukit TimahChoa Chu KangClementiGeylangHougangJurong EastJurong WestKallangMarine ParadeNovenaPasir RisPunggolQueenstownSembawangSengkangSerangoonTampinesToa PayohWoodlandsYishunCity / CBDOrchardChangi

Need Electric Gate Electrical Work? Get a Quote

EMA-licensed electric gate wiring and auto gate electrical installation โ€” island-wide across Singapore.